Why My Rod Starts but Won’t Stay Lit (Simple Welder’s Guide)
Short Answer:Your welding rod won’t stay lit because of low amperage, bad grounding, poor rod angles, rusty/old electrodes, or trying […]
Stick Welding, Troubleshooting
Stick Welding
Stick Welding
Differences Between 6011 and 6013 Rods (Clear & Simple Guide)
Short Answer:6011 rods dig deeper, penetrate through rust, paint, and dirty steel, and are great for farm repairs and structural
Stick Welding
How to Prevent Arc Blow in Stick Welding (Clear Answer)
To prevent arc blow in stick welding, you need to improve your ground connection, change your work angle, shorten your
Starting Out, Stick Welding
Why My Welds Have Excess Slag (Clear Answer)
Excess slag usually happens because of wrong rod angle, low amperage, dirty metal, or dragging the rod too slow. In
Stick Welding
Best 6010 Settings for Root Passes (Clear Answer Up Top)
Quick Answer:For most root passes using 6010 rod, the best starting settings are: These settings work for root passes on
Stick Welding
Vertical Up Stick Welding Settings (Best Settings & Fixes)
Quick Answer:For vertical up stick welding, the best settings are typically: If your vertical welds look messy, sagging, or full
Stick Welding
Best 7018 Settings for 1/4” Steel (Simple Settings That Actually Work)
Quick Answer (Straight to the Point) For welding 1/4″ steel with 7018 rod, these are the best starting settings: These
Stick Welding, Troubleshooting
Why 7018 Rod Keeps Sticking — Fixes (Simple Guide From a Welder)
Quick Answer (Straight Up) Your 7018 rod keeps sticking because your amps are too low, your arc length is too