Why My Welds Have Excess Slag (Clear Answer)
Excess slag usually happens because of wrong rod angle, low amperage, dirty metal, or dragging the rod too slow. In […]
Starting Out, Stick Welding
Stick Welding
Best 6010 Settings for Root Passes (Clear Answer Up Top)
Quick Answer:For most root passes using 6010 rod, the best starting settings are: These settings work for root passes on
Tig Welding
Best Welding Machine for Beginners Under $500 (Clear Answer at the Top)
Quick Answer:The best welding machines for beginners under $500 are easy-to-use MIG, flux-core, and multiprocess welders that let you start
Starting Out, Troubleshooting
How to Calibrate Your Welding Machine (Clear Answer Below)
Quick Answer:To calibrate your welding machine, you need to verify the output voltage, amperage, wire feed speed, and gas flow
MIG Welding
Best MIG Wire for Automotive Sheet Metal (Clear Answer Below)
Quick Answer:The best MIG wire for automotive sheet metal is .023″ ER70S-6 solid wire with 75/25 argon-CO₂ gas. It gives
Tig Welding
Best TIG Settings for Thin Aluminum (Clear Answer Below)
Quick Answer:For thin aluminum (0.040–1/8”), the best TIG settings are: These settings give you a stable arc, tight heat control,
Starting Out
Welding Safety Guide (Don’t Skip This)
Quick Answer: If you want to weld safely, you must protect your eyes and skin, manage your workspace, avoid breathing
Stick Welding
Vertical Up Stick Welding Settings (Best Settings & Fixes)
Quick Answer:For vertical up stick welding, the best settings are typically: If your vertical welds look messy, sagging, or full
Stick Welding
Best 7018 Settings for 1/4” Steel (Simple Settings That Actually Work)
Quick Answer (Straight to the Point) For welding 1/4″ steel with 7018 rod, these are the best starting settings: These
MIG Welding, Troubleshooting
How to Fix Porosity in MIG Welds (Simple, Welder-Friendly Guide)
Quick Answer (Straight to the Point) You fix porosity in MIG welds by: Porosity happens when air gets into the